-
Why don't you get support? I already have the second display of the company btt which cannot be started. Then I have another tft35 which does not boot because of a bootloader bug. And one of my skr 1.…
-
hey, I was trying to get UART working for my 2209 drivers (BTT 2209 1.2) and im getting TMC Connection Error on the screen.
what is your wiring setup for UART?
I was following this guide on yout…
-
1. 能否在[Touch Bar歌词]前增加对应播放器的icon。
2. 需要在[Touch Bar歌词]前增加[esc]按键。现行版本中如果需要esc功能,需要按下x然后按下esc,在从control strip返回歌词。
-
at first,
You could change the pinout which does not correspond on the pdf (inversion of 5v and GND) this is not serious.
no movement of the 3d touch.
3d touch tested with a BTT skr 1.4 turbo and …
-
mv ./input_libcamera.so ./mjpg-streamer/input_libcamera.so
DOES NOT WORK for some reason
32bit or 64bit version of RPi
Please advise?
-
I tried last version.
It does not flash anything:mkstft35.bin or mkstft25-u.bin
```
Jump Address Value 805c81d
SD CARD detected 0
FAT FS Link Driver OK
exit
Booting
Software version: 0.1
…
-
![0EAF5667-A44C-478B-81CF-F4F4A3514ECB](https://user-images.githubusercontent.com/47440988/72689124-b8227d80-3ad3-11ea-97ea-3400c63eda94.jpeg)
-
Hello, long time user of missionControlFullDesktopBar here, thank you!
Problem: Occasionally (several times per work day) missionControlFullDesktopBar just stops working. I have to kill it and res…
-
### Description
Connecting board to computer via usb causes low voltage error and thermal runaway until auto-shutdown.
### Steps to reproduce
1. [First Step] Connect Mac computer to SKR boa…
-