-
Hi,
I am not very good at the electronics subject. I read the `readme.md` and I do not get few parts.
> GY-21 board with SHT21 has 5V SDA/SCL pins , use FET 3.3V-5V level converter to connect to E…
-
## Problem
You're building a breadboard layout, and you want to move to a PCB. Presently the parts are randomly scattered on the PCB layout, and it is difficult (almost impossible) to find them all a…
-
_From [brendan....@gmail.com](https://code.google.com/u/110718573451811856532/) on October 23, 2009 06:06:59_
The icons for ICs, mystery part and generic ICs are not very readable or
functionally obv…
-
I'd like to build a Photopizza, but I can't seem to find overall instructions, BOM, guide, etc. The website appears to be down as well - does anyone know the status?
-
**Is your feature request related to a problem? Please describe.**
When I look at the wiring diagram here:
https://github.com/OpenInterpreter/01/blob/main/hardware/light/Labeled%20Wiring%20Diagram.p…
-
Hi. I've only been using fritzing for a short while so apologies if the issue I'm experiencing is due to ignorance and/or mis-operation.
I'm trying to create a simple pcb from a schematic. I want it …
-
Changing the assert to LOW will fix this? This test assumes that some pins are plugged?
Details below
=================================================== FAILURES ====================================…
-
Hi @DJ-Dingo, I'm looking into transforming it to a plugin but I want to be sure on what you want.
Here is what I understand that your code is doing: if a motion is detected turn on light, play a s…
-
## Current Behaviour
When there is a part-to-part connection in the breadboard view, it is impossible to connect the two connectors in the schematic or PCB by dragging from one connector to the other…
-
### Education:
- [ ] goldendict # in repo
- [x] kiwix # in repo
- [ ] wxmaxima # in repo
- [x] leocad # in repo
- [ ] openboard (https://github.com/OpenBoard-org/OpenBoard/releases)
### Develo…