-
**Describe the bug**
alpha5 cannot see any of the preinstalled boards that are visible in alpha4
**To Reproduce**
1. run alpha5
2. check installed boards
**Expected behavior**
All preinstall…
-
After pairing, in the setting I see the radio. When I select other menu items it just sends the radio into a boot loop.
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH…
-
How hard would it be to add support for the https://github.com/LilyGO/TTGO-LORA-V1 in addition to Heltec board that you already support?
$36 for a pair of them and they have a nice 3d-printed case
…
-
I'm switching boards from the TTGO T-BEAM to the board described in this commentary: https://github.com/LilyGO/TTGO-LORA32-V2.0/issues/10 (the link to the board is this one: https://es.aliexpress.com/…
-
Not sure whether to raise this as a disaster-radio issue or a LoRaLayer2 issue - apologies if I've pushed it in the wrong place.
On make:
`In file included from ./firmware/esp32_ttgo/console.cpp…
-
Hi! I'm really excited to give this a go, but just want to check something before flashing.
In the UK, the use of [433MHz is also permitted](https://www.thethingsnetwork.org/docs/lorawan/frequencie…
-
I've tried this software for days with two kind of hardware, one "SparkFun LoRa Gateway - 1-Channel (ESP32)" and one "TTGO LORA32" and the result is the same... after few hours or at most 1 or 2 days …
-
I would like to scan only BLE, so in the paxcounter.conf I should only set:
```
#define BLECOUNTER 1 // set it to 1 if you want to use BLE count, at expense of power & m…
-
We have `GetPinmap_ttgo_loraw32_v1()`, but it's not automatically picked up.
A review of the docs and the "official" Heltec LMIC indicates that it can use the same pinmap as the TTGO LoRa32 V1, so …
-
Hi, I just found this project and I'm super interested in setting this up in my community (currently Asheville, NC).
I noticed under [disaster.radio/build](https://disaster.radio/build):
> Our fir…