-
********************************************************************************************************************
Please ignore this this message because the actual problem was a bad STL file. Eve…
-
**Application version**
cura 4.5
**Platform**
OSX 10.15.4
**Printer**
FLSUN QQS
**Reproduction steps**
1. define settings in cura
2. slice the settings in cura
3. Save on HD
4. Ope…
-
**Application version**
Latest
**Platform**
Win 10 Ryzen 5 2600 16GB ddr5 2x RX570 3x 1TB SSD
**Printer**
FLSUN - qq S
**Reproduction steps**
Put model (disc 1.5 mm x 30mm with inner hole…
Hum77 updated
4 years ago
-
One more suggestion please, in stacked version there is extra support printed on the front for the pins. I have a problem removing the support on external pins, middle two pins seems to only touch the…
ales1 updated
4 years ago
-
#### What were you doing?
Running on Windows 7, I set my Octoprint upload folder to a folder where I also save and edit gcode. I had a gcode file in this directory open in my text editor, but was t…
-
**Application version**
4.5.0
**Platform**
Linux home 5.3.0-40-generic #32~18.04.1-Ubuntu SMP Mon Feb 3 14:05:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
**Printer**
Flsun qq-s
**Reproducti…
-
**Describe the bug**
SuperSlicer Crashes on launch.
**To Reproduce**
Steps to reproduce the behavior:
Attempt to open SuperSlicer.
**3D Model and Slic3r Configuration Export**
N/A
**Expected…
-
I am using bugfix-1.1.x
There is no problem with the probing area when using bilinear leveling
After I sent the command `G29 P1`, the printer start probing at 0,0 position
Here is the mesh that I…
-
### Bug Description
Issuing the M20 command is expected to return a list of files available from a mounted SD card on the controller; in this issue it only ever returns an empty list regardless…
-
### Description
When pressing Calibrate X(/Y/Z) in Delta Calibration printer starts to shake printhead in direction of corresponding tower and reboots after few seconds.
### Steps to Reprodu…