-
SpeedyBee f405 wing mini
Inav Version 7.1.2
Ranger T1
Hello everyone,
I built a Ranger T1. Everything went well, but the engines don't run after arming, despite 3D fix and pre-arm check every…
-
## Current Behavior
on 16 ch, in sbus no problem, but in crsf output ch 15 and 16 are not working they are stable at 1811
## Steps to Reproduce
set the protocol to 16ch and look at the output
…
-
### Describe the bug
Updating my F405-CTR from 4.4.3 to 4.5.0-RC3 causes the CALIBRATING flag on MSP.
Rolling back to 4.4.3 and everything is fine.
### To Reproduce
Flash Matek F405-CTR to 4.5.0…
mdrjr updated
3 months ago
-
Hello,
I've dug out my old sp racing f3 evo board. And flashed it with legacy firmware 2.5.0. Everything is up and running. And I want to add GPS, nothing fancy just speed in my osd.
But I've f…
-
### Describe the bug
The ELRS receiver is not getting RxBat from the flight controller anymore
### To Reproduce
Flash 4.5 RC2 with cloud options 'Acro trainer', 'OSD SD', 'PinIO' and 'VTX'
Radio c…
-
### Minimum requirements
- [X] Core clock speed is 48 MHz or faster?
- [X] Is the CPU an ARM Cortex M0+ or later?
- [X] Is the host microcontroller's UART peripheral able to support 420,000 (or highe…
-
I modified the print_ I2c_ Scan() section code ,I modified the I2C PINS and now I can find the I2C device. So now I can confirm that the software is not working properly
void print_i2c_scan() {
//…
-
### Describe the bug
FC BetaFPV F405 2-3S 20A V1.0 FC, barometer not showing up in 4.5 but showing up in 4.4.1
Already add custom define BARO_DPS310, set BARO_CS to same pin with 4.4.1, set baro bus…
-
### Describe the bug
I didn´t notice before but I had updated the firmware to 4.4.3 and when connected to the Betaflight the BARO icon shows offline (disabled).
I already checked in the configurat…
-
This package is really fun, but I need to discuss about the CRSF protection implementation. Context: since [ASP.NET Core in .NET 8 Preview 7](https://devblogs.microsoft.com/dotnet/asp-net-core-updates…
lnoss updated
11 months ago