-
Hi,
I finally have my setup together but there seems to be a problem. so far
RPI 3, install of rpi-rgb-led-matrix all went fine. Disabled audio in /boot/config.txt to be sure
Adafruit hat
HUB75 pa…
-
Hello,
i bought a P10 SMD 32x16 (LED 3535) scan 1/4, I have Rpi-3 Model B andHUB75 from adafruit.
I have problem with using library.
I read from: https://github.com/hzeller/rpi-rgb-led-matrix/is…
-
Hi All,
I have a 64x32 panel which i am using to build a pixel display for my rpi3 and i tried running the hzeller code for the Panel.
I have had experience with the code base and have also creat…
-
Hello Brian ,
After several test on the TextDemo.py i don't find a way to scroll a text "entirely" :
the text do not complety exit from the left side of the screen
instead of that it's disa…
-
Hi again! After my fight with hub12 I bought 32x16 rgb led matrix with hub75 i think.
I have now:
R1 || G1
B1 || no description
R2 || G2
B2 || no description
A || B
no description || no descrip…
Czajo updated
7 years ago
-
Hello hzeller!
Inspired by your blog i decided to take my annual engineering project as 16_32 rgb matrix controlled by raspberry pi 2. I followwed your link from here(https://learn.adafruit.com/conn…
-
Hi Mr Hzeller, i just wanted to say thank you again for your Library and Help including other member in the group, i manage to make my 16x32 rgb 3 chains panel working all Demo but there still issues …
-
Hi;
I have problem with using library.You can see that on vide and photos. I have Rpi-3 Model B and 16x32 RGB led matrix
My panel works with both 3.3v and 5v. And I run it with active adapter and with…
-
Hello Again,
I am using these led matrix plates and the problem with them is 1st and 9th line is internally connected so even if i write a sentence in first row it gets copied in the next row. As y…
-
e.g. I have 6 64x32 panels arranged in an upside down U chain. It would be great if I could specify that arrangement through command line arguments, to avoid the need to write a custom transformer and…