-
I have just received an akk omnibus f4 v2, and I am trying to setup my zohd dart with inav. So far I have flashed INAV 2.4 onto the board and gotten the gps to work and the esc too, the reciever tab s…
-
I spent a few hours setting up my matek f411-wing fc on inav and connected with no issues. (Following the steps from a document in the inav fb group). When I configured gps, and flashed a model on my …
-
my fixed wing (1.9.0) can enter the offboard mode successfully ,but any publisher by mavros (setpoint_position/local, setpoint_ray/local, or setpoint_attitude ) is invalid. I cannot control my fw in …
-
Despite my best efforts, I have been unable to tune into a good PIFF setting on my wing (a popular ARWING 900 model).
It is my understanding that normally, for a wing, you would use the following …
-
On the page https://opentx.gitbooks.io/manual-for-opentx-2-2/content/companion/flashing.html
the link to "Sdcard" (https://opentx.gitbooks.io/manual-for-opentx-2-2/content/companion/sdcard.md) is bro…
-
Hi,
I'm running a R9M and R9MM combo with latest flex 181109 firmware via f.port connected to TX2 pin on my Matek F405 wing (INAV 2.0.1). I have some weird fail-safes during flight even with good rss…
-
## Current Behavior
LED strip will not light
## Steps to Reproduce
1. Soldered and tested with Betaflight LED strip. Works fine
2. Installed with INAV Configurator 2.0.0 the Kakute F7 hex f…
-
A little dumb problem. But I don't have a xbox controller or any other. It’s just that in our team I’m not a pilot, but rather a developer and didn’t think about the need for one for myself. So, how t…
-
**Describe the bug**
General system wide replay, is broken on master (and likely v1.9). EKF2 replay works fine.
**To Reproduce**
Steps to reproduce the behavior:
1. Follow instructions for syste…
-
This is way more involved then i've ever been in compiling scripts and apps through python/perl/etc, so i'm way out of my depth.
I first ran into trouble with the activeperl installation, when down…