-
System Information
------------------
Raspberry Pi 2 Model B Rev 1.1
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
Raspberry P…
BuMRK updated
4 years ago
-
HI!
We are testing resin os 2.7.6+rev1 on a IOT2040 and we have installed the AC3160 WiFi module on the mini PCI-Express slot but is not recognised by the os.
We have previously used the IOT with …
-
RFC Link: https://github.com/opensearch-project/OpenSearch/issues/11061
## High Level Approach
### Tracked System Resources per Sandbox
We are going to track the following resources per sandb…
-
Hello, I have been working on an optical sensor system powered by RPi 4B (8GB) and HQ camera (IMX477). I've been struggling to resolve this issue since April! In its current configuration, I have 4 HQ…
-
**Describe the bug**
The rate of input events arriving at userspace when using the Official 7inch touchscreen is too low. Input events arrive at user space at about 33Hz, resulting in perceived laggi…
-
**Describe the bug**
When I enable ``dtoverlay=vc4-kms-v3d`` the HDMI output is off by one pixel.
This means that he first pixel on the left should actually be the last on the right.
Easy to see wh…
-
Hi,
I'm using a Raspberry Pi 400 with default Raspberry Pi OS provided in the kit's MicroSD card. I upgraded the system today.
The system freezes after ~1s after starting `gcompris` an educative s…
-
Built a fresh Armbian Edge 6.8.4 and included Radeon, AMDGPU, and Nouveau in the kernel configuration, and added an extra patch with the one from @mariobalanica as mentioned here: https://github.com/H…
-
**Describe the bug**
I use a enc28j60 ethernet module with spi on my CM3+. Sometimes it randomly disconnects (about once every day) with following error (dmesg):
`eth0 (enc28j60): transmit queue 0 t…
-
### Describe the bug
rpi-eeprom-update doesn't list the latest VL805 firmware update until after it has been installed.
```
root@pi-taucha:~# rpi-eeprom-update
*** UPDATE AVAILABLE ***
BOOTLOA…