-
Blade booting order can be controlled using SOAP call. This be exposed as one
of the HPI controls for blades \(per blade basis\)
If "Automatically Power On Server" in the power configuration can b…
-
The guide could go to an own page, not nested within another guide, and it should explain (or point to) how to achieve shrinking space (compression levels and others).
-
This may be related to the closed #78 but it might be different. I have a bunch of RPi4B 4GB models (all running the latest EEPROM firmware), which I use an SD card to boot the UEFI firmware to load …
-
I have the following posts in my **_posts/** folder:
```
-rw-r--r-- 1 alvaro alvaro 43783 oct 9 12:29 2020-10-01-configuracion-raid-5.markdown
-rw-r--r-- 1 alvaro alvaro 33636 oct 9 12:28 2020-…
-
When I shutdown my Dell T7910 and do "Remote Command -> Remote Reboot to BIOS Setup" (to change the boot order and boot to another OS), my LAN adapter (built-in I217-LM Gigabit Ethernet) gets stuck at…
-
## Current situation
I was setting things up and got an error on `racker factory check` about it not being able to determine PXE interface by looking at the columns of mac addresses.
Looking at th…
-
`ostree-prepare-root` and `ostree-system-generator` both read the deploy path solely from `/proc/cmdline`. On live PXE systems, the deploy path doesn't come from kernel args; instead, the initramfs s…
-
**RancherOS Version: 0.6.1**
**Where are you running RancherOS? (bare-metal and virtualbox)**
When passing the following parameters `rancher.state.dev=LABEL=RANCHER_STATE rancher.state.autoformat=[/…
bachp updated
4 years ago
-
I'm having an issue with getting unattended Windows install to kick off. VM gets created correctly and the packer gets to the "Waiting on IP" stage, but the Unattended 2k16 install never kicks off. …
-
Hello! As you’ve probably heard from Spencer A. today, my team has been struggling a bit with fitting our use case to Terraform. Here are the things we are trying to achieve:
* Run bare metal serv…