-
Hi Ivan,
as we talked I want to change some Variables:
1. Beep Trim velocity
2. Seat shaker volume
3. Avionic displays: position/size on front display
4. The size of the NVG Circle (forgot to mentio…
-
Matt Removed 53.150 W0YC/R off of St. Paul Campus on June 6, 2021 and used the feedline for 443.000/147.750 receiver site.
- [x] Order or build a Henry or similar amplifier for 6M.
- [x] Check th…
-
#### Describe the problem
The Nexus amplifier formats are not supported.
#### Describe your solution
Support Nexus supported file formats which are: *.mbd and *.bcd.
#### Describe possible a…
-
hello, i was exploring 2525D libraries for c# and found this one. i am unable to find the option to set amplifier fields for symbol before exporting it to Bitmap. can you please comment on this
-
Hi, thanks for uploading this. I started using GNUitar more than 20 years ago, and simply loved it. I had a compiled version of GNUitar with jack support, but it was 32 bit, and ever since the 64 bit …
-
Hi,
yesterday I got an ATS-20+ from Amazon (brand "Yunxwd").
The RF amps device marking here is "C1R". This could be a UPC2746TB from HUABAN (formerly this amp was from NEC).
The pinning seems to…
-
The following corrections should be made to make the device function:
* GAIN_SLOT should be connected with a 100k resistor to Vcc (to set gain at 3dB to avoid overloading the power supply)
* The NC …
-
A PLUGIN WAS INVOLVED IN THIS CRASH
BAD PLUGIN: PiggyCustomEnchants
Error: Amplifier must be in range 0 - 255, got -3
File: pmsrc/src/entity/effect/EffectInstance
Line: 111
Type: InvalidArgumen…
-
To add information about a recording device, e.g. who was the manufacturer, what kind of amplifier, what version is it, what settings were used (or analogous information about an imaging microscope), …
-
Analog Bypass
If we switch IN1_L and IN1_R in the future versions, it looks like we may have a low power analog bypass mode, which will reduce latency and we can put esp32 into sleep mode to save pow…