-
would at least require supplying a custom tool to the state to override gcode_e.
-
Since we started the project we edited the openra/mod/ra gamefiles for our purpose, forcing our players to overwrite their original gamefiles. I think we should start an own mod named "rabhc" as the a…
-
[eagle_test.zip](https://github.com/vlachoudis/bCNC/files/1778388/eagle_test.zip)
Hi,
problem : traces are milled thiner on top layer
I checked the bottom and top files z values, they are b…
-
as the title states.
please only use this thread for questions and discussion and open new feature requests for actual issues with OpenCNCPilot.
Martin
-
![SAVE_20201224_112308](https://user-images.githubusercontent.com/3323812/103150019-eabb0880-476f-11eb-8071-ec914c7c3d31.jpg)
#### Description
Currently I am trying to laser files created by LAS…
-
i really hope someone in here can help me with the complete setup between the ugs controller, cnc v3 shield and the arduino relay.
i've read a lot of forums already, some says i can connect the inp…
-
Hey!
I'm here to report some findings on the use of electromagnets. I was able to achieve 250Hz frequency and a rise time of 10 - 20ms using an electromagnet from a simple arduino relay and a neodi…
-
What are you using Grbl for? I'd love to see how Grbl is being used by everyone, as I have absolutely no clue. This would be tremendously useful in determining the future for Grbl and what we should p…
-
The stepper.moveTo() commands reliably as long as I have serial commands running in the loop(). If I remove all serial.Print commands or edited out the serial.Begin() line in setup() the steppers moto…
-
When milling a PCB board and drilling the holes a person changes drills exactly ten million three hundred and fourty seven times. Right now M6 is ignored. Can we get UGCS to pause sending new g-code…