-
**PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT**
****
## Current Behavior
INAV runs properly on flight controller when configurator is connected until EEPROM is saved without …
-
I am attempting to implement a servo motor to steer the car.
This allows for more precise and variable turns, since the servo is able to turn to a specific angle instead of just switching directio…
-
There is a possibility I am doing something wrong here thus the "potential issue".
Camera: Canon EOS 100D (also known as Rebel SL1)
AF: Tested with it on and off
Issue: Focus stacking not wor…
-
[MotorList.docx](https://github.com/MTechNRMC/2017NRMC_ControlServer/files/856681/MotorList.docx)
-
I am currently working on a DIY continuous fiber extrusion system, and have the mechanics figured out. Currently, I am coming up with a software solution.
because the fiber cutter isn't directly at…
-
I have Mks servo 57D 1.0.4. Microstepping is set 16. Lock protection is enabled. Mplyer option is disabled. CanRSP is disabled. Motor mode SR_VFOC.
Test case:
- max current set to 500
- I send …
-
I'm trying to use this driver with a board purchased in June 2022 (https://www.amazon.ca/gp/product/B07VMDFTVR) - it looks to be identical the board this repo works with, and it identifies with the sa…
-
I think with respect to task (6) it is easy to have some-kind of spring loaded shunt, the problem would be making it power efficient. A potentially efficient way to do this would be a small servo whic…
-
Hello, thanks a lot for your toolbox.
I am trying to rotate the servo motor in continuous mode. Then, I tried to get the instantaneous velocity. However, I only get -1 which means that there is a p…
-
Given #248 to add a servo, I thought I would suggest adding ESCs as well. Control of ESCs may help shape the thoughts on control of servos. I'll also add some servo info in #248. I've been programmi…