-
**Is your feature request related to a problem? Please describe.**
had a wemos lying around an want to make a build. i am a noob.
used an template for doing this, but the build-setting were not cons…
-
Hi!
I have a EMS-ESP for over 5 months connected to Home Assistant, im always stay up to date with firmware. I've connected 8 DS sesnsors with additional pullup resistor. Frequently i have readings o…
-
I bought a HydraBus a few days ago and started to play with it:
```
> show system
HydraFW (HydraBus) v0.9-beta-115-ge463bc7 2020-01-29
sysTime: 0x046b48aa.
cyclecounter: 0x00809116 cycles.
cyc…
-
> Supported and tested Hardware
>
> embedded real life test
> setup: run test-example, use ds9490-master, arduino 1.8.3, Windows 10 and the board-library named in the brackets
Hi,
…
-
I have been using a simple method to test Node Red nodes to begin to identify those that are working. The method is to create a simple flow with limited nodes focused on the node on test. The first re…
mtoko updated
2 years ago
-
I tried to emulate a DS2438 on a Wemos D1 and find the "sensor" with Loxone. The Wemos D1 has only 3,3V pins so I used a [level shifter](https://www.watterott.com/index.php?page=product&info=2861) to …
-
No value shown at "Current Reading" in the Temperature screen and unable to open the "Configure" screen from there
(one DS1820 temperature sensor connected).
adb log when opening the Temperature …
-
Hi all,
I have spotted a bug/typo for the DS1820 sensor in the development branch. The values for tempf and tempc are currently swapped. I'm happy to submit a PR as it's a trivial change in code an…
-
-
Before submitting a problem please check the troubleshooting section
https://docs.openmqttgateway.com/upload/troubleshoot.html
**Describe the bug**
The discovery of the sensor work fine, but valu…