-
### Describe the bug
FLYWOO F745 AIO board with AM32 ESCs. Upon arming at 8K the craft jerks violently and motors can be heard rapidly changing speed. Stable flight is impossible at 8K.
Reverting …
-
### Describe the issue
We are testing Bluejay for our upcoming [Crazyflie 2.1 - brushless](https://www.bitcraze.io/2023/10/say-hello-to-the-crazyflie-2-1-brushless/). As part of this we do autonomous…
-
Hi everyone I just built my first drone got it on the bench and am noticing around 2-3% error rate while spinning the motors up in betaflight. I got no error when I switched over to Dshot 300 and eve…
-
@conuthead
running at 1104 input , has breaks from time to time (motor stops spinning for ca 120ms)
if you spin slightly higher or lower it does not happen !
![DS6_QuickPrint9](https://user-imag…
-
We use cube-orange on our drones, PX4 - v1.11.3
We encounter the following issues, we did not see on pixhawk cube-black
1. Local position invalid
- Drone may be armed, but do not takeoff. In stab…
-
### Describe the bug
DShot EDT ESC temperatures do not display until first arm, and all display values as expected when first armed.
However, they intermittently display after disarming, and ESC…
-
Hi, and thanks for working on improving BLHeli-S.
I'm sure you're aware of this, it's a 'feature' of BLHeli-S, but I was wondering if you can do anything to improve it a bit.
What I'm referring …
-
## Current Behavior
-
I've been setting BEEPER -ON_USB via the CLI for many years but on the latest few versions of iNav, the beeper continues to beep while the FC is only plugged in the USB cable. This issue occurs on al…
-
Dear BlHELI
I tried to write a FC myself. Do you have any info about how to add Dshot protocol in the program?
Tkcks updated
3 years ago