-
im using nixos nixos-unstable@916ee862e87 and nixpkgs-wayland overlay @ https://github.com/colemickens/nixpkgs-wayland/tree/fff3832d082ccc20447173fc8d75aebff94469ec
when i run sway the screen stays…
-
Hello, I just installed this for the first time and made my own MIDI adapter for the GPIO pins using your schematic. I hooked up an OLED display and it works properly. Munt is missing some note-off'…
-
### Description of the setup:
Laptop with windows 10 and guest VM install with Debian 9.
* Device: Red-Pitaya, Laptop.
* SD card image:Pavel demin RedPitaya notes(Alpine Linux)
* Applicat…
-
The Power/Volume buttons worked perfectly with kernel version 5.9.13, but stopped working after the upgrade to 5.10.1
After updating the kernel from `5.9.13-surface` to `5.10.1-surface` via…
-
I have a question about memory handling. The following SystemVerilog is interpreted by the frontend as a memory - the `$memrd`, `$memwr` and `$meminit` cells are generated:
```verilog
module ram(inp…
-
I sketched initial version of schematics ([link](https://github.com/sinara-hw/mirny/blob/master/PCB/Mirny.PDF)).
I've chosen [ADF4351](http://www.analog.com/media/en/technical-documentation/data-shee…
-
for (genvar ..) generate_statement() is not supported in Quartus
it likes
generate
genvar g;
for(g ...) generate_statement()
endgenerate
The suggestion is made to add ifdef QUARTUS aroun…
-
Hi,
I am trying to simulate latest Linux with spike on Ubuntu 16.04. But it seems that the device tree cannot be initialized successfully.
The version of related repositories as listed as belows…
-
Migen left this undefined so we have wide latitude here. IMO the following should happen:
* In simulation, a hard crash, with a nice message. (This already happens, but without the nice message.)
…
-
**Issue by [whitequark](https://github.com/whitequark)**
_Sunday Dec 16, 2018 at 10:21 GMT_
_Originally opened as https://github.com/m-labs/nmigen/issues/7_
----
Migen left this undefined so we hav…