-
Hello,
I bought a Cheetah v2.0, that I would like to run with a TFT24 v1.1 screen. I managed to connect it in "Touch screen mod" (still got a "no printer attached" issue, but it's not a big deal I …
-
The image showing the connection for a BL touch is incorrect and will damage the BLT and / or control board !!!
this is what it should be >>
![FYSETC CHeetah V2 BLT](https://user-images.githubuser…
-
selector endstop pin is defined reversed in fysetc 's hardware config file with the wrong ! symbol
**wrong (current version of file)**
`
Select the endstop you want depending if you are using s…
-
its not making the ini file for wifi why what is going on ?
RECV: Connect fail, please check your INI file or set the wifi config and connect again
ken58w@yahoo,com
-
I set the endstops X and Y to be on MAX
`#define USE_XMAX_PLUG
#define USE_YMAX_PLUG`
and
`#define X_HOME_DIR 1
#define Y_HOME_DIR 1`
While the X axis is home, the Y axis is no longer. …
-
I am trying to build my own software on the Fystec-spider
I want to blink the flash LED as a test.
```
#include
void setup()
{
pinMode(PD3, OUTPUT);
}
void loop()
{
digital…
-
I am running the SD-WIFI-PRO on a Prusa MK3S+. My SD-WIFI-PRO is in AP mode and is connected to my home wifi.
I found that reloading the SD-WIFI-PRO's internal webpage would interrupt my print. (Fu…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Marlin 2.0.9.2 fails to compile after enabling HiPrecy DGUS LCD. Using the basic configuratio…
-
I wanted to move my setup (Spider 2.3 and Paspberry Pi Zero 2W) from USB connection to UART.
Reconfiguration of Pi according to the FYSETC documentation was easy, but when I tried to reflash MCU - th…
-
In description it says that this board support marlin 2.0 but neither marlin repository nor this one contains configuration for this board. Is there any instructions on building marlin firmware for th…