-
```
Start HeeksCAD
Create a cube.
Click somewhere in the graphics.
Close HeeksCAD.
It crashes in HeeksCADapp::ReleaseIndex,
which is being called from
HeeksCADapp::~HeeksCADapp()
{
delete m_m…
-
Hello! I'm wondering if I can use this to control our 3f grippers. I believe this is for the 2f, so I would expect to need to do some work to make it work for 3f but so far this is the best/closest th…
-
We are trying to control our Baxter robot with Oculus HMD and Oculus Touch controllers.
We installed successfully [ros_reality_bridge](https://github.com/h2r/ros_reality_bridge) (no_ein branch) in …
-
Hi, great work with the simulation, very helpful
Could you guide us towards how to make the gripper close parallely?
-
Publishing gripper commands at ~100Hz causes noticeable (~1s) lag for the arm and grippers.
Publishing gripper commands at ~10Hz does not cause the arm to lag, but causes the gripper to jitter.
In…
-
-
```
Start HeeksCAD
Create a cube.
Click somewhere in the graphics.
Close HeeksCAD.
It crashes in HeeksCADapp::ReleaseIndex,
which is being called from
HeeksCADapp::~HeeksCADapp()
{
delete m_m…
-
```
Start HeeksCAD
Create a cube.
Click somewhere in the graphics.
Close HeeksCAD.
It crashes in HeeksCADapp::ReleaseIndex,
which is being called from
HeeksCADapp::~HeeksCADapp()
{
delete m_m…
-
```
Start HeeksCAD
Create a cube.
Click somewhere in the graphics.
Close HeeksCAD.
It crashes in HeeksCADapp::ReleaseIndex,
which is being called from
HeeksCADapp::~HeeksCADapp()
{
delete m_m…
-
```
Start HeeksCAD
Create a cube.
Click somewhere in the graphics.
Close HeeksCAD.
It crashes in HeeksCADapp::ReleaseIndex,
which is being called from
HeeksCADapp::~HeeksCADapp()
{
delete m_m…