-
### What would you like us to add to or change about the HackRF One documentation?
The discussion in #1340 made me think it would be useful to have a checklist in the documentation for troubleshoot…
-
It looks like `hackrf` support is not implemented.
* There is a `hackrf@.service`
* There is relevant line in `Makefile.linux`
but it looks like `hackrf.c` does not exists. The implementation i…
-
transmit only takes bytes and I'd like to send 25 bits of information about 4 times,
my parameters are the following:
```
[~ (50kHz) ] # define a base frequency
[_ (2100us) ] …
-
I am working on LoRa-E5 mini. And testing the example STM32WLx_Transmit_Interrupt, STM32WLx_Receive_Interrupt. STM32WLx_Transmit_Interrupt code is working fine but STM32WLx_Receive_Interrupt is not…
-
## LISA-T
- https://github.com/ExponentialDeepSpace/eds-archive/issues/39
## SRI-CubeSat Imaging Radar for Earth Science (SRI-CIRES)
![image](https://user-images.githubusercontent.com/1320252…
-
i wanted to run ur code on an arduino as a sender and a raspberry as a reciever but althought both code seems to be working just fine ,there is no paquet recieved in the raspberry .
-
Add custom audio filters
Implement feature for usbradio to:
- rxlpf: Receiver Audio Low Pass Filter
- rxhpf: Receiver Audio High Pass Filter
- txlpf: Transmitter Audio Low Pass Filter
- txhpf: …
-
Official recommendation is to use 16Msps for TV stream:
> 16MHz works well with PAL modes, and 13.5MHz for NTSC modes.
I built latest HackTV on Windows (packaging by pacman for MSYS2 / Mingw64 p…
-
Hopefully this isn't out of place, but I've been interested in the project since talking to Bryce ("the Doctor") at ContactCon in NYC. I'm interested in the primary vision: maximum network availabil…
-
Hi,I'm using a receiver x300 and ubx with 12.5MHz center frequency, 25MHz sample rate and GPSDO.
thor.py -m 192.168.10.2 -d "A:0" -y "TX/RX" --clock_source 'gpsdo' --time_source 'gpsdo' -c ch1 -f 1…