-
Hi,
Can't get the sensors to operate.
Connected via RLN16-410 NVR with the latest firmware 3.0.0.148.
Cameras are RLC-810A and RLC-820A with the latest firmware 3.0.0.494.
Have set internal URL,…
-
**Describe the bug**
I am getting the below error in my logs.
> This error originated from a custom integration.
>
> Logger: custom_components.reolink_dev.base
> Source: custom_components/reo…
-
Is it now possible to have Night Mode support enabled and functional in HomeKit, when the IQ4 also does have a Night Zone enabled which enables Night Arm on the panel?
I know there was the problem …
-
### Switch Firmware Version
18.1.0 (Latest)
### Atmosphère Version
1.7.1 (Latest)
### Mission Control Version
0.11.1 (Latest)
### Boot Method
Hekate
### Issue Description
After pairing Ninten…
-
According to https://github.com/noctarius/lightify-binary-protocol, it may be possible to read "Battery value", "Enabled value" and "Triggered value" for motion sensors.
Unfortunately, I don't have…
-
I have the cync dimmer switch with motion and light sensor running on the latest firmware (neutral required). In home assistant the light switches can be turned on and off, and are dimmable. However, …
-
### The problem
I already add to home assistant Matter over thread devices smart plugs from Onvis, bulbs from Nanoleaf and devices behind ZigBee Tuya agateway like bulbs or moisure sensors.
But when…
-
There may already be a solution to this problem, namely:
- Shelly Plus Add-on does not transmit data from peripheral devices (motion sensor, door magnet, temperature and humidity) to the homkit - the…
-
I recently installed Home Assistant on a Raspberry Pi4 with SSD and conbee 2. Running the Deconz add-on and want to have hue lights, motion sensors and aqara sensors on the network.
When I found ou…
-
It would be great if not only the type "InfoOnlyAnalog" is supported for sensors. At least my contact, doorbell and motion sensors are from type "InfoOnlyDigital".
See: "Platform - The widget 'Konta…