-
# Task # 02
## Perform a subset of tests on [`iotlab-m3`](https://github.com/RIOT-OS/RIOT/wiki/Board%3A-IoT-LAB-M3) node:
- [x] bitarithm_timings
- [ ] bloom_bytes
- [ ] coap
- [x] conn_ip **sent 3 pi…
-
```
while (nrf.nrf.getDataPipe() !== undefined) {
```
should be:
```
while (nrf.getDataPipe() !== undefined) {
```
-
# Task # 01
## Execute all tests on `native` and check their output:
- [x] bitarithm_timings
- [x] bloom_bytes
- [x] coap
- [x] conn_ip
- [x] cpp11_condition_variable
- [x] cpp11_mutex
- [x] cpp11_thr…
-
# Task # 03
### Perform a subset of tests (!= subset from [Task #02](https://github.com/RIOT-OS/Release-Specs/issues/23)) on [`samr21-xpro`](https://github.com/RIOT-OS/RIOT/wiki/Board%3A-SAMR21-xpro) …
-
I'm trying to use this library but I get the following error:
> The type Windows.Devices.Radios.nRF24L01P.Logging.DebugOutLoggerFactoryAdapter does not have a constructor that takes the parameters (S…
-
I bought two versions of the NRF24L01+ module, both from China. The cheaper version, however, causes problem when transmitting.
**This one works**
![image](https://cloud.githubusercontent.com/assets/…
-
I used to work with nrf24l01 (not nrf24l01+).
Just by setting nrf datarate by 1Mbps, it was working fine with mySensors v1.x.
After migration to v2.0.x, my gw and all nodes stop working (more than 20…
-
Hi guys,
Just to let you know, I had a code running on a STM32F3Discovery hooked with a NRF24L01P that used to work.
I updated RIOT (rebase on master) and it appears to fail to send messages (about …
-
Hi all,
I am facing kind of a problem on a STM32F0 MCU. The program is running pretty well but crashed after a random time. So far, it happens between 2 and 11 hours...
In the test condition, the sy…
-
When converting tests/driver_nrf24l01p_lowlevel to xtimer, I stumbled over delays based on "ticks" in `drivers/nrf24l01p/include/nrf24l01p_settings.h`.
It has to be checked if they can be used as-is …