-
I'm homebridge and a relays board attached to gpio pin. The problem is that this board activate the relay when the output is low. Is it possible to implement an inverted-output? Thanks!
-
When I use 2 board in one pc & use this project ,the enum list two same ID,I dont know why ,Could you help me about this,thx
The code as follow
`root@acrn-HP-Compaq-8200-Elite-SFF-PC:/tmp/tempd…
-
Need to update the database to revise the default pins. This is due to the addition of a relay board which caused pin offsets
COS1=446
COS2=447
COS3=454
COS4=455
COS5=462
COS6=463
COS7=470
…
-
I used ESP Home with Home Assistant to create custom firmware.
it works when i use jumper wires (all the pins) to create some distance between the relay board and the ESP-01 module.
but when i put…
-
In v1.1.0 the C13 and C14 connectors should be shifted further away from the relay board to improve the angle at which cables are routed into the relay board. Currently it is too steep and causes the …
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the…
-
### The problem
Hi!
I'm encourtering an issue with the GROW Fingerprint reader R503. It make the ESP32 reboot when scanning a finger.
When I unplug the UART BUS the board doesn't restart when I s…
-
### The problem
When uploading an script with WireGuard, I can ping the board, but the web interface doesn't work. Changing the board and uploading the same script to an esp32 allows me to use the we…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.2
```
### Code/REPL
```python
import wifi
import adafruit_connection_manager
import adafruit_minimqtt as my_mqtt
cert_file = mqt…
-
Hi to everyone and many thanks for this great work, I've just a simple question, is there a possibility to use utilities keys with PAI? I've got some automations with this function such as gate open, …