-
Hi, congratulate won the camp, and the paper was accepted to iv 2018!
In the `README.md` , you have mentioned " I used lots of vehicle sensors(e.g. RADAR, LIDAR, ...) to perceive environments aro…
ghost updated
5 years ago
-
**Describe the bug**
Some of models are not created because of similar child and and parrent names of different resources.
```shell
2022-05-25 15:11:03 - RMG - [14] Scanning: /redfish/v1/Chassis/Ba…
-
This is for tracking the eventual improvement/cleanup of the Aqara (H1) switch quirks:
1. ✅ ~~https://github.com/zigpy/zha-device-handlers/blob/dev/zhaquirks/xiaomi/aqara/opple_switch.py is missing…
-
Hello,
I have tried to load the integration a few times but it wont create this binary sensor "motion alarm"
IT does create the other binary sensor called "online"
Camera is IPC-G26E (imou bul…
-
Hi
I am trying to use this library to interface Acclima soil sensors (TDT and with TDR315H) with Arduino/ESP32. When connecting the sensors and using the d_simple_logger.ino example sketch (after …
-
----------------------------------------------------------------------------------------------------
| Required Info | …
-
The thermal subsystem (`TMP`) currently lacks a driver for 7th and later generation models. This should be a SSAM client device driver and needs devices to be added to the [registry](https://github.co…
qzed updated
4 months ago
-
Would you consider adding support to those two models. They are the Smartmi fan S and S2 models from 2019. S2 is with battery built in. They are practically like the already existing natural wind fans…
-
When I run roslaunch eca_a9_gazebo start_demo_teleop.launch joy_id:=0 appears
ERROR: cannot launch node of type [joy/joy_node]: joy
ROS path [0]=/opt/ros/noetic/share/ros
ROS path [1]=/home/tao/uuv…
-
Hello
A few weeks ago I bought the Arducam_USB module with some models of CMOS sensors. I have only tried USBTest with the MT9V034 and it works correctly.
First to thank ArduCam for enabling your …