-
Is it possible to add support for servos to the SX1509 library?
Seems that the PWM functionality could do this.
Need 50 Hz pulses between 1.0 and 2.0 milliseconds.
As implemented by: https://www.…
-
Currently servo is using multiple GL bindings: glow, sparkle and gleam (with last two being part of servo organization). Per discussion in https://servo.zulipchat.com/#narrow/stream/263398-general/top…
-
If possible, the BOM could add a column for Australia / New Zealand (or even just Oceania)
An Australian based seller of the Waveshare servo board is:
https://core-electronics.com.au/serial-bus-…
-
As part of readying more Servo crates (notably `style`/`stylo` for publishing on crates.io, I've been looking at polishing `servo_arc`, but I noticed that this crate is already a version of `servo_arc…
-
I don't know if it's possible. But if it is, it would be awesome if the SmartPort connector on the transmitter could be used as a basic servo tester.
I figured it would be a tool in the system > con…
-
Probably overkill to add these as issues, and I would consider this VERY minor, but realizing that might be best way to track.
The tolerance on the base idle clamp (pictured) is too tight. When usi…
-
I’m currently building a NativeScript app that uses BLE to connect to an ESP32 microcontroller. The microcontroller initializes a BLE server with a name, a service UUID, and characteristic UUIDs, as s…
-
Hi there..
I have had some code working for a long time where I used a LILYGO SIM7000G unit connected to a DRV8871 motor driver through pins 32 and 33, and a servo connected to PIN 12. But suddenly…
-
STS3215 Servo：https://item.taobao.com/item.htm?id=769061524145
Motor Control Board：https://item.taobao.com/item.htm?id=738955630278
I found these two part in chinese shop, but uncertainty about fe…
-
Servos twitching during unit testing of assembly in various locations.
It appears that there may be some kind of electrical issue affecting the circuit due to the large power draw of servos.