-
Because IP68 / IP67 servos will not break that quickly
-
Please provide specifications for slip ring and servos; ideally links to Amazon items.
fraab updated
5 months ago
-
Current corner servo-to-board connection uses 2.54mm pitch DuPont connectors, which provide no mechanical connection/locking aside from friction and the spring tension of the female connector. The use…
-
```
The current design of the receiver shield has several connection points for
servos, but using the current 5V to power servos you'll only get 2-3 servos
working before overload/overheating.
Could…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…