-
Can anyone help me resolve this error?
Warning! Ignore unknown configuration option `monitor_flags` in section [env]
Warning! `src_filter` configuration option in section [env:include_tree] is dep…
-
I have connected my main board as well as BTT UPS 12v on the SMPS. But as output has common rails (one for 12v and 1 for ground): whenever power goes out, the UPS starts powering the main board throug…
-
After installing the SKR Mini E3 v3 in my Ender 3 Pro, my power supply now emits a clicking noise that comes from its internal fan. As soon as the printer fans come to a stop, so does the fan in the P…
-
``Hi, i'm tring to compile firmware for BTT-SKR-mini-E3 V3
using this firmware:
[https://github.com/bigtreetech/Marlin/tree/SKR-mini-E3-V3.0-G0B1](url)
and config from:
[https://github.com/bigtree…
-
I HAVE AN ENDER 3 PRO AND I JUST REPLACED THE MOTHERBOARD AND THE SCREEN. I UPDATED THE FIRMWARE TO THE LATEST ON THE TFT DEVICE. I HAVE CHECKED 50 TIMES TO MAKE SURE THAT THE SERIAL CABLE IS PLUGGED …
-
Hello Im familiar with compiling firmware but im not a pro.
I have successfully gotten Microprobe v1 to work and it worked great for months but I broke the pin. I bought a new microprobe thinking i…
-
Hi, I would like to connect my btt mini12864 to my board. I've seen some tutorial for the skr mini e3 v3, but none for the skr e3 dip v1.1.
Anyone would know how ?
-
Printing to the SKR Mini E3 V3 with TFT24 from Octopi is not showing progress bar.
-
I replaced the silent board on my ender 5 with a SKR MINI E3 V2.0 and a TFT 35 V3.0. I installed the firmware from (https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/…
-
I am planning on replacing the mainboard for my Creality Ender 5 Plus with a BTT SKR Mini E3 V3.0, and I am having extreme difficulties figuring out how to configure the Marlin Firmware to work with m…