-
Hi,
I use Heltec Lora 32 v2 with Oled.
I tried it with LiPo and Li-ion batteries but the display show 0% and ~0.3V (+00.0mV/min).
The device runs on battery well and charges from usb.
Thanks!
-
Hi,
The docs mention support for the "TTGO T-Beam V1 (433MHz SX1278)". Is the 1.1 version of the board also supported? Those seem to be the only ones i can buy on AliExpress. [Link](https://nl.alie…
-
### Category
BLE
### Hardware
Rak4631
### Firmware Version
2.1.23.04bbdc6
### Description
Tested across multiple RAK devices to expedite and confirm.
Desired effect is to have a …
-
Hello,
thank you for this great sketch :)
I have just got this running on my Lilygo Tbeam V1.2
I have set my default GPS lat & Lon with alt.
My GPS pins on the board are stated as 34 and 12 w…
-
## Versions and Firmware
```
(base) ➜ firmware-2 meshtastic --version
2.3.8
(base) ➜ firmware-2 meshtastic --info
My info: { "myNodeNum": 3771639288, "rebootCount": 3, "minAppVersion": 3…
-
This isn't really an issue, more like a documentation snippet which I didn't find anywhere else.
I got 2 ESP32 Wifi Kit 32 boards. Fantastic little boards. One of the projects was to interface with…
-
I've managed to get 3 devices working with esp32RET and 2 Due's using GVRET.
I am testing nearly all the devices on one car, started with the Dues.
The reliability of the Due's is really good I had …
Hurde updated
7 months ago
-
1. Stratux version:eu27
2. Stratux config: 978 and 1090 RTL-SDR
YES GPS
NO 978 Mhz (UAT)
YES 1090 Mhz (ADS-B/Mode-S ES)
YES 868 Mhz (OGN)
NO 162 MHz (AIS)
YES AHRS Sensor
YES Baro Sensor
…
-
Hello.
Maybe I did stupid things...
I ordered a T-beam ttgo motherboard (T22_V11-2019.1212) with Meshtastic software on it.
I uploaded an esp-32-ogn software that I used before, but I didn't se…
-
**Describe the bug**
PlatformIO cannot compile
```
In file included from src/esp32/esp32_gps.cpp:40:
.pio/libdeps/heltec_wifi_lora_32_V2/EspSoftwareSerial/src/SoftwareSerial.h:24:10: fatal err…