-
Has anyone else had issues when querying the global mean temperature in the Model Interface? I am receiving a message stating "The query returned no results" and I am not sure what would be contributi…
-
The Hanshow Nebular 350 tags are reporting a temperature of 0.
I have checked and can confirm the ATC1441 BLE firmware is able to report temperature. So would love for this to come across to OEPL.
-
Orca slicer seems to generate temperature control commands using "M104" with a comment at the end, like so:
**M104 S225 ; set nozzle temperature**
This happens for example if you do a temperatur…
-
### Description
Would it be possible to add a sensor to report the temperature at the thermostat itself? At present, the default Nest integration's temperature sensor uses the active temperature sens…
-
I have four units (3xMSZ-HR25VF and 1xMSZ-HR50VF) and I have been running the integrations from both geoffdavis and echavet on a Wemos D1 mini for a couple of weeks before switching to this one.
Fo…
-
### Describe the feature
Currently I can only read out the temperature from the X1C, but not set it.
I would like to set also the temperature of the bed.
usecase:
I am printing a lot with ABS.…
-
Hi,
Thanks for this tool, I have (unfortunately) to use it a lot for debugging some hardware issues and memtest86+ is of a great help in that. The version tested is the v6.10 (debian12)
I changed …
-
When printing filaments with different printing temps, the by the slicer applied M104 in the gcode is basically interpreted as a M109 during the tool change. I wonder why? For example a temperature di…
-
**Application version**
4.20.21
**Platform**
WIndows 11
**Printer**
Custom printer, Snapmaker J1
**Reproduction steps**
1. import 2 objects. select 1 extrudersfor each. Deactivate all…
-
Thank you for the good code, TUYA electrical appliance scale correction. I had the same problem, 10 times higher readings.
However, activating TUYA Fix also changed the TUYA temperature and humidit…