-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
IMPORT…
-
It will be cool to support the configuration of a fresh board out of the box:
https://github.com/bigtreetech/SKR-Pico
-
Hello. I'm trying to set up sd card support. I figured out the problems during compilation, but still an error 60 mounting the SD card.
I commented the exp2 part and uncommented it from the onboard
…
-
Anyone tested the new "**SKR E3 Turbo**" board from BTT/Biqu on stock Creality CR-10 or stock Creality CR-10S 3D-printer?
https://github.com/bigtreetech/BIGTREETECH-SKR-E3-Turbo
https://www.biq…
Hedda updated
3 years ago
-
The way that fluidnc wants uart channels to be set up has changed, see [this page](http://wiki.fluidnc.com/en/config/uart_sections) of the wiki.
> Trinamic UART devices like TMC2208 and TMC2209 no…
-
When homing specific axes, which have their max rate set lower than the locate/seek homing rate, the TCOOLTHRS is set according to the locate/seek homing rate. This leads to TCOOLTHRS being too low to…
-
This issue will automatically convert a Grbl_Esp32 "machine.h" file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
Attach your M…
-
Stallguard does not function properly (or as expected?) on a 2209 driver. The following line is relevant, and setting autoscale to true recovers proper stallguard behaviour on my system: https://githu…
-
I recently purchased a queen bee pro with the
xpro v5 controller. I have installed the latest firmware, cncjs software and I'm at the point where I would configure my axis'.
I've opened The seria…
-
Hello,
I'm building my own 3d printer. and i need a little help how can i calculate the Stepper Motor Current value.
I ordered SKR Mini E3 V2.0 Board, and Nema17 Stepper Motor 17HS4401 stepper…