-
Can you please show the wiring of the encoder pins? In the code there are in and output pins that somehow are both marked as pins for the rotary encoder. I thought the encoder only has pin1, pin2 and …
-
[CAN SPARK] IDs: 24, Received parameter invalid error parameter id 17
Device firmware could not be retrieved. Check that the device is running v6 firmware, the device ID is correct, the specified CAN…
-
A wiring diagram (like your other projects) would be helpful. Thank you.
-
Dans Hardware (USB TTL converter)
Red 5V
Black GND
Yellow (Nextion RX - USB TTL TX)
Blue (Nextion TX - USB TTL RX)
-
I don't see any input_pullups in code as assumed (like in constructor?), no idea where to connect the button's other end and encoder's common pin. Adding one or two sentences in readme would be really…
-
Your approach is awesome! How did you wire it compared to the other 10mbps approach? Did you remove the crystal from the lan8720 board and then generate a clock from the pico directly? If so, what fre…
-
Hi!
Can you please share how to connect the gps and the sil5351 to the Arduino Uno r3?
Please.... a wiring diagram would be very great
-
Hello, since i've no idea on how to wire and i fear to make a mess, could you please post a more in-depth wiring diagram?
Thanks in advance.
-
The wiring of the Norenigma Rotor IV in the code does not match the expected wiring as specified on the
(https://www.cryptomuseum.com/crypto/enigma/i/)
File and Line Number:
cryptii/blob/main/src…
-
Sorry, I have absolutely no idea about electrical engineering but am trying to understand it right now, so I have a few questions.
Why is it not enough to connect pin 22 to RDY0, why do PA1, PA2, P…