-
In the page
https://github.com/ADLINK/meta-adlink-rockchip/wiki/01.-Build-Yocto-Image-on-LEC-PX30-with-IPi-SMARC
The BSP_FOLDER variable is used but not defined. I am sure this is the base direc…
rpcme updated
3 years ago
-
Hello,
Do you have any plans to support the current Yocto LTS (Kirkstone) in the near future?
Thanks
-
**Description**
I build a 64-bit system based on "Kirksone" branch and I meet a problem with the GPU hardware acceleration on Raspberry 4/CM4. The problem occurs when playing video directly from GS…
-
Seeing the following when testing on my PCM-071-5432DE11I.A0 dev kit:
"""
root@phyboard-lyra-am62xx-3:\~# dd if=/dev/zero of=/sys/bus/i2c/devices/0-0050/eeprom bs=256 count=1
1+0 records in
1+0 …
-
Hi, it seems like adding TFLITE_ENABLE_GPU via bbappend via -DTFLITE_ENABLE_GPU=ON seems to build correctly for me.
However, I don't think the delegate or other required libraries are installed. D…
-
Hello,
I am trying boot from NAND with yocto generated files. I am able to flash the images using sam-ba-3.7. I am getting the below error while booting. Can someone help to resolve this issue.
I…
-
Once you have setup a yocto dizzy (1.7) work area as per the instructions in this repository or in the Microsemi application note ENT-AN1125 "Microsemi Linux BSP Yocto" an attempt to call `bitbake lin…
-
-
Hello! Will you add support for pulse boards or I should search support in the other repos?
-
This issues will track my attempt to integrate gadget_hid into the 3.10 kernel from yocto that has the intel patches applied which are included the Intel Edison BSP release.
From https://communities.…