-
The Embedded Systems Engineering role will specifically encompass the creation and technical application of embedded firmware for the operation and support of metering systems having FPGA architecture…
-
Would you consider adding a column to your spreadsheet titled "BOM Available".
To indicate whether a project has completed that very important milestone or having a parts list?
In my humblest of…
-
Hi Marqs,
On my unit Y2 (audio ADC crystal) was installed with quite a lot of lead length between it and the board. It had flopped over and was worryingly close to touching the back of the SCART conn…
-
Trying JLCPCB as PCB manufacturing vendor. Must adapt the boards to their settings:
- Min. Trace: 5mil
- Min. Spacing: 5mil
- Min. Via To Trace (same as trace spacing in Kicad): 5mil
- Min. Via …
-
Hello, and thank you for such an interesting concept and implementation to use the NGC's second port.
Would it be possible to adapt this solution for a full-sized SD card (because many people who w…
iaros updated
5 years ago
-
Symbols in schematics cannot be normally displayed, showing rectangles with question marks. When double-clicking the part and the icon button at "Symbol - Library Reference", an error message prompts …
-
Originally Medtronics release was not very open; I have heard it now has much more material. I would love someone to evaluate it as an opinion and leave it in this issue.
-
Refer to manufacturing issue: https://github.com/HeronMkII/pcbs/issues/14
-
-
I've manufactured some board with that footprint, but the contact with the battery fails, probably because of the soldermask thickness.
Should i make a PR with a larger pad, as i made in #1622?