-
Using your HAL code, I'm getting this error:
`u8g2_esp32_i2c_byte_cb u8g2_esp32_hal.c:179 (0 && "i2c_master_cmd_begin(I2C_MASTER_NUM, handle_i2c, I2C_TIMEOUT_MS / portTICK_RATE_MS)")`
I'm in the…
ghost updated
6 months ago
-
> As a badge hacker I want to use the display using high level framebuffer MicroPython code
-
I have follewd various examples of flashing esp32 with this software and everything appears to be same as examples but the router always shows as having no internet connection when connected to my own…
-
`In file included from c:\Users\\Documents\Arduino\libraries\MCUFRIEND_kbv\MCUFRIEND_kbv.cpp:38:
c:\Users\\Documents\Arduino\libraries\MCUFRIEND_kbv\utility/mcufriend_shield.h: In function 'void writ…
-
Hello everyone. What could be the reason if my igate based on lilygo TBeam-APX2101-V1.2 is deaf for pure RX operation? It doesn't receive anything. I tried it with two different codes. First from Pete…
-
So, i've looked though all issues etc, I still cannot find a solution to this.
- I've selected the right board in the appglobals, as far as I can see,
- I've attempted formatting the SD in differe…
-
### Problem Description
It would be nice if you provide the installation instructions.
I'm using an ESP32 board and building your project with platformio - is it correct? It doesn't seem that I ca…
-
Hello, I can connect to the bms with the ordinary esp32wroom development board and the ESP32 ARDUINO PACKAGE2.0.3 burning program, but there is an error and I cannot read the data,
- Created client…
-
**Describe the bug**
The SX1268 does not turn on. The serial output shows that communication with the chip does not occur, as the frequency setting nor gain settings at startup apply. Additionally it…
mph88 updated
11 months ago
-
Is there a way to give the option to select metric or imperial units in the setup?
Thank you!!!
Ernie