-
No filter is working when replaying a log file.
1. Setup hardware and channel 1 to 125kbit, PCAN USB
2. Select log file, CAN, replay, configure
3. Select filters, for example "stop" everything between…
-
Kernel version: 3.10.25+
I compiled a driver module from peak(peak-linux-driver-7.9), And when I type 'insmod pcan.ko', kernel crashed with the messages below.
[ 171.987546] pcan: Release_20130814_…
-
When compiling icub-main (trought the codyco-superbuild) there is a compiling error.
```
[ 7%] Performing build step for 'ICUB'
[ 1%] Copying manager.py to /home/calandra/Software/codyco-superbuild…
-
My project has 5 simulated systems, every system corresponds to different CAN module, 2 of these 5 have a different Baud rate. These 5 CANs are connected to the micro through a 3 PCAN-USB Pro (Peak)…
-
I'm looking for solutions to simulate and monitor CAN-BUS in order to test my prototype that uses the CAN protocol.
Here the situation:
I installed the software (v1.8.0), and the last version driver…
-
Most users of Numeric.Statistics.PCA would probably expect a function that returns the n largest components instead of all components greater than a threshold.
Maybe provide an additional function `p…
-
This is a new hardware from Peak which includes dual channel support. This is not supported through existing PCAN USB interface drivers and requires separate USB Pro drivers.
Refer: http://www.peak-…
-
Official information from PCAN is that there is no difference in driver nor API between the devices PCAN-USB and PCAN-USB PRO. Nonetheless only the PCAN-USB device is recognized.
Apparently BUSAMSTER…
-
Hi, I have some epos 2 24/2 motorcontrollers here and would like to connect them to PC via CAN bus (and serial to Usb Peak adapter). Could this work out of the box with your code? It just runs a bit s…
-
I have access to several CAN interfaces from Vector, PCAN, IXXAT and tested the Vector interfaces to BUSMASTER.
If i try to use with an VN7600 on CAN interfaces one and two (in BUSMASTER is it two and…