-
# Task # 02
## Perform a subset of tests on [`iotlab-m3`](https://github.com/RIOT-OS/RIOT/wiki/Board%3A-IoT-LAB-M3) node:
- [ ] bitarithm_timings
- [x] bloom_bytes OK but don't know if the output i…
kYc0o updated
7 years ago
-
# Task # 02
## Perform a subset of tests on [`iotlab-m3`](https://github.com/RIOT-OS/RIOT/wiki/Board%3A-IoT-LAB-M3) node:
- [x] bitarithm_timings
- [ ] bloom_bytes
- [ ] coap
- [x] conn_ip **sent 3 pi…
-
# Task # 01
## Execute all tests on `native` and check their output:
- [x] bitarithm_timings
- [x] bloom_bytes
- [x] coap
- [x] conn_ip
- [x] cpp11_condition_variable
- [x] cpp11_mutex
- [x] cpp11_thr…
-
# Task # 03
### Perform a subset of tests (!= subset from [Task #02](https://github.com/RIOT-OS/Release-Specs/issues/23)) on [`samr21-xpro`](https://github.com/RIOT-OS/RIOT/wiki/Board%3A-SAMR21-xpro) …
-
Hi Jose,
I noticed the lux value returned from BH1750 sensor set up in low resulution mode differs by the factor of 2 from that returned from set up to high resulution mode.
-
I use the sensor together with other I2C devices on one arduino and therfore would like to set a unique I2C adress for the sensor.
-
#### Issue Description
IIO node by default assume the IIO driver has buffer implemented, but not all IIO drivers have buffer implementation, therefore the lookup for buffer entry in sysfs may retur…
lblim updated
8 years ago
-
---
### Configuration
**Operating system**:
MAC OSX
**PlatformIO Version** (`platformio --version`):
PlatformIO, version 2.11.2
### Description of problem
not build it
on original Arduino IDE no pro…
-
Hi,
https://github.com/hexenmeister/AS_BH1750 adds a virtual mode to the bh1750 library enabling it to auto-adjust to the current conditions (low light, bright sunshine) as good as possible.
Thank y…
-
Even when you pull my fix, the i2c library is not being used correctly.
I attempted to patch this problem, but ran into a bug?
I'll send a frame with payload 0x56 0x00 0x2D to the SensorNode, it the…