-
0. Could you send email to [xianjun.jiao@ugent.be](mailto:xianjun.jiao@ugent.be) to introduce your self?
Sent
1. Our image is used directly or you build your own image?
I used the image "openwifi…
-
First at all: the driver is running fine on a Raspberry Pi with raspian and two TEMPerHUM attached (0C45:7402 Microdia). However, the measurements appear a bit strange. E.g. in normal conditions (arou…
-
### Tested versions
- Reproducible in: 4.2.1 stable
- NOT reproducible in 3.5.2 stable
### System information
macOS Ventura, Android 13 - compatibility
### Issue description
Showing/lo…
-
The CHT8310 supports the following temperature ranges
```
Temperature accuracy with calibration:
±0.2℃ (typ.) from 0℃ to 80℃
±0.4℃ (typ.) -20℃ to 100℃
±0.5℃ (typ.) -40℃ to 125℃
```
And the …
-
Hi,
So i wanted to contact you about features i'd like to contribute and maybe discuss this in advance so its clear on how you might want these added. I have quite alot of experience with these IMU…
-
Hi there!
I have to preface this with the following:
I have almost none experience when it comes to using Radios / Wireless-stuff. So I'm sorry in advance for not being very helpful.
I recently b…
-
THIS IS A MEGA ISSUE. You should create an issue for any of the checkboxes below and start implementing!!! There are instructional videos for getting started attached below as well!
# IEC 60617 Sym…
-
```
I use SIP only when the cell carrier signal is too weak and wifi is an
available. Under call
option we need a selection to use Cell when available and SIP if the cell
signal is too weak
or not…
-
```
I use SIP only when the cell carrier signal is too weak and wifi is an
available. Under call
option we need a selection to use Cell when available and SIP if the cell
signal is too weak
or not…
-
```
I use SIP only when the cell carrier signal is too weak and wifi is an
available. Under call
option we need a selection to use Cell when available and SIP if the cell
signal is too weak
or not…