-
### Version
_Version of SuperSlicer used goes here (help->about)_
2.3.56.5
### Operating system type + version
_What OS are you using, and state any version #s_
Macintosh 10.13.6
### Behavi…
-
### What happened?
crashes on launch with apple error log
### Project file & How to reproduce
launch app
-------------------------------------
Translated Report (Full Report Below)
-----------…
-
This happens at least with repetier firmware in slice3r 1.2.9
In eeprom I can set a maximum extrusion speed (something like 2mm/s on 3mm abs on my K8200)
Retraction speed is set at 40mm/s, but it will…
-
### Version
1.34.0 AppImage
### Operating system type + version
Gentoo Linux
### Behavior
With the wraptest I get extra material even when using very thick perimeters.
I have solid layers to…
-
Would it be possible to have the option to have post-processing scripts for gcode that are tied to the Printer config instead of the print settings with a documented list of what happens first?
It'd…
-
I sliced the following model http://www.thingiverse.com/thing:13505 with Slic3r 1.0.0RC2. The generated gcode is here: https://dl.dropboxusercontent.com/u/4637549/Stretchlet1.gcode
As you can see in …
-
It would be great if one could set an order in which multiple objects are printed.
If you simply hit "More" there is no way to determine in which order the objects are printed.
The only possiple way …
-
Some people print walls corrugated instead of flat to prevent ABS parts warping, like this:
Strawberry Perl 5.24
### Behavior
Selecting Cut on…
-
slic3r 1.2.9
win 7 64
the contact z distance is none or 0.2
with some plastic and some configuration the distance is not enough for the support to easy pull out
but there is no way to configure it
…