-
Not a major issue but...
1. add the 1-wire interface to REM
2. go to the 1-wire device list
3. name each DS18B20 device and save it
4. save settings on main panel
5. note that probe names are l…
-
Hello,
I'm working on a project which builds heavily on the LTE_Demo in order to send SMS when sensors on as esp32 detect certain conditions. These SMS functions are meant to complement the project…
-
Hi @alf45tar
I've rebuilt my Pedalino-8 with the Lilygo T-Display S3, this time I've bought a M-Audio expression pedal and I've added a TRS jack to connect it to the esp board.
Unfortunately and wit…
-
Perhaps related to [this](https://github.com/RobTillaart/ADS1X15/issues/2) issue.
ADS1113 has no gain control and the maximum voltage is fixed to ±2.048 V.
Usually, to convert the ADC readings to …
ghost updated
8 months ago
-
hi
first: thank you for this library =)
I tested it today and found that the wire speed has a great influence on microcontroller performance.
One factor is the time needed to transmit the data,…
-
I've just uploaded the [latest GH Actions build](https://github.com/letscontrolit/ESPEasy/actions/runs/8230869237) to the [web flasher](https://td-er.nl/ESPEasy/latest/)
So I would like to summon …
TD-er updated
7 months ago
-
There are modules in the code:
SSD1306,
ADS1X15,
HMC5883 , MPU6050,
but I can't find my configuration and pin connections, unless the code is incomplete
-
As one of the latest KS stretch goals, we need to implement suite of drivers for number of sensors, and it would be nice to come up with a general sensor driver model to follow.
Requirements:
1. A…
-
Following in the footsteps of issue #3, the use of `/` notation has been reintroduced as of `1.10.2` and in doing so requires the use of Python 3.8. This is not a thing that can be guaranteed, especia…
-
### Operating System
Windows 11
### Esptool Version
4.5.1
### Python Version
3.11.7
### Chip Description
ESP32
### Device Description
ESP32 WROOM-32
### Hardware Configuration
I'm using an …