-
I would like to request a new vehicle type call Flight Coach.
We build firmware for the flight coach, and find that there way too many defaults setting enabled for us to have to disable before we c…
-
For some reason, my Barometer Bmp280 is not working on the updated version of iNav 7.1
It was working fine on iNav 7.0 and betaflight 4.5
Here's a screenshot:
![image](https://github.com/user-…
-
**Description:**
PX4 struggles to hold altitude using the barometer in both the AltHold and PosHold flight modes. Cross-breezes result in altitude gains/losses. Maneuvers result in altitude loss. Typ…
-
I'm taking hyperbaric oxygen therapy, whereby I breathe pure O2 at an ambient pressure of ~2bar for 90 minutes in multi-seat pressure chamber. Previously I've used an Android phone with a barometer ap…
-
I working on Tyro79FC , is a Eachine STRM32F411ce flight controller. It is full compatible with the MatekF411 target, but SDA and SCL pins are not exposed on the board. I would like to add a BMP280 b…
-
I setup some config with WeAct Studio STM32F405RGT6 Board but motor 4 (PWM) does not work. I tried with 2 boards and also probed the signal with an oscilloscope but not signal is shown.
It would…
-
Sensor fusion does not work properly in SITlL, at least in RealFlight, XPlane not yet tested.
If the barometer is used, the altitude calculation starts to go crazy and displays seemingly random alt…
-
**Version and Platform (required):**
- Binary Ninja Version: 3.5.4286-dev, 58311b01
- OS: macos
- OS Version: 13.3
- CPU Architecture: arm64
I would like to change `0x2004a7a8`, `0x2004a698`, `…
-
When using the selection zoom tool in v1.11 on barometer readings, the vertical scale of the zoomed graph is too great resulting in essentially a flat line.
For example, the day graph has a vertica…
-
Its on all firmwares with this kernel
on stock kernel with mokee&lineage barometer woks fine & camera is 16 as usual