-
Thanks @Candas1 for adding that `ADC_USE_INTERRUPT` code to `Simple FOC\src\current_sense\hardware_specific\gd32\gd32f130/gd32f130_mcu.cpp`.
`//#define ADC_USE_INTERRUPT // If defined, wil…
-
I want to know where is the dc battery voltage sensing circuit connected. where is the single shunt resistor for current sensing connected.
i want to know where is the button pin connected. where is…
-
**_Este projeto é grande porém muito importante._**
_Cuidado com os Rabbit Holes!_
Para início recomendo que comecem pesquisando algumas coisas básicas como:
- Ponte H
- Rodas de Reação
- BLDC
-…
-
can you tell me and maybe others how to use this? how does configuring the servo work? I cant start the GUI when opening with python.
-
I probably get around 15% less power near LVC compared to fully charged battery due to voltage drop.
The idea is to gradually (and optionally) increase Keep Current (%) by x % as the battery voltag…
-
Hello dear I'd like to do galvolaser and ı need to read gcode. My project need 2 axis x and y so how can ı use grbl
-
while running the moteus BLDC motor with the r4.11 controllor(moteus), the calibration process showed an error for runtime, saying the firmware doesnot support the direction of the Motor. The exact er…
-
Here is my use case:
The SimplePWM does create a pwm for a motor. At the start of the pwm cycle the motor is enabled. A millisecond after this event I want to measure the current of the motor with AD…
-
Hello,
I am using the system in an industrial machine, USART driven and motor controled FOC in SPD_MODE, the commands to the howerboard were send by ESP8266 wich is driven by a linux app using UDP pr…
-
Not a major issue as you've said you've got several others on the way for testing, but the link to the motor you used is now out of stock: [AliExpress](https://www.aliexpress.com/item/1005001384349991…