-
if we have a standard (like requiring s-o-b tags), we should be able to add a travis check that'd run on every pull request
-
@nbdd0121
> It seems that KERN_CONT is heavily discouraged: the comment in `kern_levels.h` says:
>
> > Only to be used by core/arch code during early bootup (a continued line is not SMP-safe othe…
-
As an example:
- Genivi Linux DLT daemon uses uncrustify code beautifier as base for code contributions (even giving a fixed config setting configuration)
- https://github.com/GENIVI/dlt-daemon
- h…
-
Data corruption from #93 still relevant and situation worse than it looks.
```
if (tlen so_rcv)) {
if (th->th_seq == tp->rcv_nxt &&
OFP_LIST_EMPTY(&tp->t_segq) &&
TCPS_HAVEESTA…
-
I understand this driver is in the kernel 'Staging' category. I was wondering what the process is to try for inclusion in the main Linux kernel source tree?
-
参考:
https://github.com/zephyrproject-rtos/zephyr/blob/main/.github/workflows/footprint.yml
-
[Kanboard:29383](http://ustr-erl-6690.na.uis.unisys.com/?controller=task&action=show&task_id=29383&project_id=37)
```
void
bus_create_response(struct visor_device *bus_info, int response)
{
if…
-
Log coming from tests should be store into DB
### Ideas
The system should be able to store the logs coming from the tests done for specific series. There are two possible ways to do this
1. Adding an…
-
Put device into MaskRom mode. Build was successfull, but can not open loader
-
*neheb:*
Supply the following if possible:
- MQMaker WiTi
- All released LEDE versions
- enable the 5ghz interface. LEDE reports that it's up and running but it isn't.
I tried 3 builds.
L…