-
Hello, I firstly used the docker to flash the nina under the official ubuntu virtual machine, but the command didn't work as expected. There is something trouble of the command 'cd' in the dockerflie.…
-
Adding certain variables to the parameter framework seems to cause a hard fault (M1 and M4 solid red) when flashing, without any debugging/console information whatsoever.
Setup:
- latest firmware …
-
i see the REV D on this file https://github.com/bitcraze/hardware/blob/master/src/products/crazyradio-pa/datasheet/crazyradio-pa-pcb-mechanics.png
but, the schematic pdf file shows, REV B, is it in…
-
Hi,
I've recently been working on using teleop_xbox360.launch and hover_vicon.launch to run.
In both cases, the ServiceProxy calls in controller.py (in crazyflie_demo) cause md5sum errors
`self._…
ng4mf updated
4 years ago
-
Hello
In a [previous issue](https://github.com/USC-ACTLab/crazyswarm/issues/92#issuecomment-423003531) you suggested I use a crazyradio for every 4 crazyflies (or something similar) when sending fu…
-
Hi, I use crazyswarm with Optitrack MOCAP. Motive version is 1.10.3.
When I choose optitrack for motion_capture_type and motionCapture for object_tracking_type, the server dies with exit code -11 aft…
-
Hi,
I have several crazyflie 2.0s (>20) and crazy radio PA's (~7). I am trying to set up the crazyswarm software and part of that is assigning channels to all of the radios/crazyflies, so I am a…
-
Hi,
I am note able to perfom HID key strokes injection with bettercap and my CrazyRadio PA flush with nrf-rsearch-firmware, I also tried with Unifyer dongle with same firmware and same result.
…
-
Hello,
I have followed the instructions for using crazyswarm with OptiTrack but I am running through some issues.
Let me first describe my setup:
- I have 1 crazyflie 2.1
- 1 crazyradio PA
…
-
I am running the following:
Crazyflie 2.0: I have flashed `firmware-cf2-2020.02.zip` through the `cfclient` GUI.
Crazyradio PA: I have flashed `cradio-pa-0.53.bin` by running the following commands …