-
new to Arduino cnc, I loaded the default setup to my ESP32 but don't know what to do to assign pins.
I found one document saying what pins do what
https://github.com/bdring/Grbl_Esp32/wiki/Setting-U…
-
So is it normal for the pen arm to jerk around? I can't seem to get a nice fluid movement. I'm using 16th micro steps on my cnc shield and tried running my timings are 300, 200 and 100 but nothing rea…
-
Don't use this version on the Ender 5 pro. the z-axis steps are 2x on ender 5 pro (it has a different z-axis screw) so this version of the firmware will only move up 1/2 the correct amount, which of …
-
I tried the Robin Fw 2.03 an 2.04 on Robin 2.2 Board, but i am not able to upload G-code to SD-Card, also i am not able to print g-code, stored on the SD Card. Printing over Wifi works good, printing …
-
Unfortunately, recent changes locked down a bunch of the I2C and SPI pins, and they need to be re-routed. Smoothie's default pin assignments are listed here: http://smoothieware.org/lpc1769-pin-usage.…
-
Hi
I have an SKR 1.4 Turbo. I've installed TMC2208 driver (UART mode) in X, Y, Z axis (this works) and i have tested A4988 (motor is stuttlering and dont change direction), DRV8825 driver (motor do…
-
Ordered for testing:
**Drivers:**
[A4988](https://www.amazon.com/gp/product/B07BND65C8/)
[TMC2209 V1.3](https://www.amazon.com/gp/product/B07ZPYKL46/)
[DM556](https://www.amazon.com/gp/product/B…
-
The driver API does not have support for controlling the power stage or reading a fault. There's a bit of a difficulty here, since the same pin is used for both, and I don't believe there are traits i…
-
Hi, I am Francesco Montedori.
First of all thanks a lot for sharing your code. I followed both your and Wouter Klop tutorial and i managed to reproduce the circuit with the changes that you made (re…
-
I know this one is rare, but the text, would be cool if you can mirror it, along with a few more fonts. My machine is not setup right, and It would be amazing to mirror the text.
Also great work! T…