-
Investigate:
- Sign and validate updates so devices doesn't have to trust the source (e.g. HTTP server)
- Support Secure Boot v2 so it's easier
- Pre-encryption would be nice also
- Root CA can …
LuKks updated
2 months ago
-
unable to update IoTT Stick via macOS
update.mac has the wrong (new line) character.
Giving the below error.
```
usage: esptool write_flash [-h] [--erase-all] [--flash_freq {keep,40m,26m,20m…
-
the device not booting up shows nothing after fresh the firmware, tried several times, no luck
esptool.py --chip esp32-s3 --port /dev/cu.usbmodem2301 --baud 115200 write_flash -z 0x1000 acid-drop_v…
-
With this patch, it will compile on Mac OS 10.10:
```
diff --git a/binimage/esptool_binimage.c b/binimage/esptool_binimage.c
index 6879cbb..1231059 100644
--- a/binimage/esptool_binimage.c
+++ b/bini…
0xPIT updated
8 years ago
-
When I start the the Flash.bat file I get the message that the ESPtool.exe file is missing, although it is in the same directory, can someone help me out please.
![ESPtool_missing](https://github.c…
-
When using espflash 3.1.1 on the P4 dev board, it fails to detect the chip:
```
$ espflash board-info
[2024-09-12T15:32:39Z INFO ] Serial port: '/dev/ttyUSB0'
[2024-09-12T15:32:39Z INFO ] Connec…
-
### Wiki Search Terms
N/A
### Controller Board
ESP32-MINI-1 and ESP32 devkitC V4
### Machine Description
N/A
### Input Circuits
_No response_
### Configuration file
```yaml
…
-
LeafMiner v 0.0.13
[Module with ESP32-WROOM-32](https://www.aliexpress.com/item/1005006336964908.html) has USB-C with HL-340 UART, 4MB of FLASH, 30 pins, 2 buttons, 2 LEDs. It can run NerdMiner_V2 …
-
Hello!
I purchased an evil crow rf v2 on aliexpress after arriving I tried to flash it with firmware but error appeared. In arduino ide error:
```
Sketch uses 940046 bytes (71%) of program storage…
-
Looking for some assistance using your pico-uart-bridge to flash an ESP device via esptool.
I currently keep getting timeouts through ESPtool. When I connect to minicom and look at the ttyACM0 dev…