-
This is from https://kitspace.org/boards/github.com/emard/ulx3s/
gerber: [ulx3s-F.Cu.gtl](https://cloud.monostable.co.uk/ulx3s-F.Cu.gtl)
output of gerber-to-svg:
```
warning at line 56 - blo…
-
[updated for Run 1.2p]
This issue will be a log/diary the operational progress of the protoDC2 phoSim image generation at NERSC. This issue is **not** intended to be a venue for discussing phoSim co…
-
In this issue we discuss the LibrePCB supported file formats. Feel free to comment.
First, we need a document which describes the latest version of LibrePCB file formats.
ghost updated
7 years ago
-
Check Rev C Gerbers against Rev B Gerbers to make sure any and all differences are accounted for. The quickest way to do this is to use GerbV to XOR Rev B and Rev C, leaving the differences highlighte…
-
Check Rev C Gerbers against Rev B Gerbers to make sure any and all differences are accounted for. The quickest way to do this is to use GerbV to XOR Rev B and Rev C, leaving the differences highlighte…
-
Revision B hardware testing has identified several changes that would be ideal to incorporate with a board spin. Most of these are manufacturing related to help ensure a well designed PCB for producti…
-
_From [stefanhermann79@googlemail.com](https://code.google.com/u/stefanhermann79@googlemail.com/) on July 25, 2012 02:51:21_
Add additional files to the Gerber export which contains the SMD pad infor…
-
```
when board is part of panelizer? and rotated? and the custom part is on the
board, gerber export creates a large rectangle covering the whole part.
```
Original issue reported on code.google.co…
-
```
when board is part of panelizer? and rotated? and the custom part is on the
board, gerber export creates a large rectangle covering the whole part.
```
Original issue reported on code.google.co…
-
```
Add additional files to the Gerber export which contains the SMD pad
informations to produce paste masks*.
The tryout with Eagle shows, there is no assigned file extention for that
layer. Wikip…