-
I am getting occasional failures when trying to obtain both the color image and body index from a Femto Mega camera. When it gets in this mode it stops receiving any images and I have to restart the s…
-
Hi,
i am using a Zytemp TN168
(http://www.zytemp.com/products/tn168.asp). As shown on the Picture i connected it to a Mega 2560 Arduino Board. i used your new libs:
https://github.com/freetronics/…
-
**Original report ([archived issue](https://osrf-migration.github.io/gazebo-gh-pages/#!/osrf/gazebo/issues/2001)) by Nate Koenig (Bitbucket: [Nathan Koenig](https://bitbucket.org/%7Bc862cdd9-fcc8-4419…
-
**Question**
So, I've been experimenting with the ev3dev2 platform, I'm having a ball, it's great, but my attempt at making an IR-beacon-chasing robot has run into a serious issue - the data coming…
-
### The problem
After receiving a command from the IR Climate component, the air conditioner disconnects from WiFi. Reconnection using the mobile app is required.
### Which version of ESPHome ha…
-
### Device information
I have 3 air conditioning units that I currently control with an IR device through Tuya. I now control them via the community app using RAW commands. The IR device is equippe…
-
Have two identical MSZ-GE25VAD2 aircon units - one works fine, the other can only be turned off with SmartIr. Same model remote as well. Any ideas?
**Home Assistant version**
2024.3.3
**…
-
Control forward movement to always stop at the same distance to a wall in front.
-
We used Sharp IR sensors in the last several years' robots. They provide an analog voltage which varies according to the distance to the nearest object. A graph of voltage-versus-distance is provided …
-
**I want to use OpenCV to display RGB images, Depth images and Ir images captured by the camera. However, the expected effect cannot be achieved, and all created images cannot be displayed normall…