-
### Help,
**how to fix this problem ?**
**operating system: Windows 10 64bit**
GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad80df4 (2019-04-22-20:25)
Licensed unde…
-
The mpsse implementation seems to be buggy. I cannot get this adapter to reliably work with OpenOCD. At times OpenOCD just hangs with the message "Haven't made progress in mpsse_flush()..."
This se…
-
Hello,
After managing to install gap_sdk successfully, I wanted to test my board with the helloworld example.
After a `make all` with no errors, I got to the helloworld directory and attempted to ru…
-
I implemented SweRV_EH1 on a Zedboard fpga. I am trying to use openOCD and Jtag Arm-USB-Tiny_H to download code to the board as instructed in the README. I have checked the physical connection and ma…
-
Open On-Chip Debugger 0.11.0+dev-04033-g058dfa50d (2023-02-20-09:48)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
/home/wjc/Desktop/VexRiscv_old/cpu0.y…
-
hi,
I would like to connect ARC HS36 include 4 cores but I got those errors:
Open On-Chip Debugger 0.9.0-dev-g72f0b9b-dirty (2019-02-10-17:04)
Licensed under GNU GPL v2
For bug reports, read
…
-
New to hardware and MCUs in general; apologies in advance if there's something obvious going on here.
I have a Picoprobe with the latest firmware which is ostensibly connected correctly to another …
tmb updated
10 months ago
-
`openocd` that comes with buildenv as a conda package fails to flash image on the FPGA flash, it looks like it has some kind of communication issue because the flash `ID` is detected as `0x00ffffff`
…
-
I asked this on book repo yesterday, but it seems it applies to this repo so I would to give it a try. I followed the instructions to install tools needed on MacOS but failed with error like this:
…
-
When the Digilent Atlys is still running the firmware which ships with the board (supplied by Digilent) the SPI flash is automatically configured in QSPI mode which openocd doesn't know how to talk.
…