-
## Current Behavior
The 7" Quad is flashed with regular INAV 6 and since then has changed dramatically in behaviour after disarming as after landing properly. I looks like the quad doesnt figure that…
-
## Current Behavior
It is not possible to arm the drone. GPS is mounted and for PID tuning I would like to use system without GPS fix to speed up process. Therefore I disabled all relevant GPS settin…
-
### Describe the bug
Hello,
I have a JHEF405 GF16 FC and a betafpv M03 VTX, and I can't seems to make smartaudio working between the two. This is somewhat problematic as this vtx don't have other me…
-
### Describe the bug
When you turn on GPS, the craft name parameter is overwritten. Moreover, all this is stored in EEPROM.
I don’t know, maybe it occurred to someone to do this on purpose, but i…
-
### Describe the bug
I have the gps rescue sanity checks set to “on failsafe” meaning it should let me gps rescue even when right next to the home point. But when I activate gps rescue, the quad just…
-
Based on iNAV 7.0 Oct 31 2023 Build
Servos Outputting
MID, MIN, MAX and Rate %, Reverse
Has strange behaviour when setting values where servos may not set position correctly.
For example, VT…
-
### Describe the bug
While dropping Throttle to Zero my quadcopter continues to ascend. Blackbox logs show that Motors 3 and 2 are start at 45% while 4 and 1 are at 0% while Airmode attempts to hold…
-
## Current Behavior
When activating the GEPRC M1025-DQ GPS, DPS310 barometer on my SpeedyBee F7 V3 stack with iNav 7.1.1, a red icon appears next to the barometer status and the ESC continu…
-
**1.** License Name: Knuth-MMIXware
**2.** Short identifier: Knuth-MMIXware
**3.** License Author or steward: Unknown
**4.** Comments: Found in Fedora during License review in https://gitlab.com/fedor…
-
First of all, thank you so much for this repo. Much appreciated.
The recommended Wiki Upgrade plugin fails with default settings (just installed Doku) with below erros:
Errors above! You s…