-
Is it possible to get the technical data of the stepper motors and the manufacturer?
I would like to use the plugin klipper_tmc_autotune.
https://github.com/andrewmcgr/klipper_tmc_autotune/tree/ma…
-
Hallo @Maro-KNX-Wiser
du hast mir auf einem anderen Kanal geschrieben:
`Hallo Hansfriedrich Danke für das coole Plugin, welches ich seit dem Weekend für meine Wiser Anlage zuhause nutze. eine Frag…
-
Setup automated checks of the system to see if motors are drawing too much current or no current, etc.
We could have seen that the launcher motor was licensed at Remix if we had an automated test …
-
Hey everybody-
I found out that brushless motors are common in old CD-Rom drives, I disassembled one and came out with a brushless motor, two modifiable brushed motors, and various cogs we may be abl…
-
We need to have a control that turns on a motor to a slow speed (low voltage) and waits until the current in the Talon increases (sees a load when the rope is attached to the robot). Then it increases…
-
It can be:
- [dxsoul v1](http://www.dxsoul.com/product/diy-car-model-tt-motor-encoder-w-65mm-wheel-901216335#.Vj5Up_mrQVA) $4.99 for one wheel + one motor. I think the quality of these wheel is very l…
-
# Lessons Learned
1. Motors need a lot of current, and stall current can be dramatically higher than free-running current. Our motors have the following specs: Stall Current 162 mA, Free Running Cu…
-
Worden deze nu wel ondersteund ?
-
**Feature description**
A small single use solid fuel rocket motor with less thrust and weight than a small thruster but more than a firework with adjustable fuel load (timed delay) and *almost* harm…
-
## Is your feature request related to a problem? Please describe.
The optimal controller for a DC motor position-velocity model is an array of P controllers (e.g., P on position, P on velocity) and…