-
Verified in JMRI 5.0+Rc441642522 running under Ubuntu 20.04.
After starting an LCC Hub (LCC->Start Hub), a window pops open that shows the "Hub IP address", but only shows "127.0.1.1:12021". Actual…
-
I would like to be able to send the eventid that I am configuring from the CDI panel. Can we add a button to do that, or some equivalent action (double click, a keypress, mouse activated dropdown men…
-
The input validation (while you type) accepts the values as copied from most uses of the event ids and shows green that it is ok. The hover text correctly shows the form of the events using leading/pa…
-
Added issue posted to Groups.io: https://groups.io/g/openlcb/message/14161 by Kenneth Ott
Upon reviewing the CAN Frame Transfer Technical Note, TN-9.7.2.1, dated Apr 25, 2021 I came across several …
-
## Summary
In my recent discussions with Balazs, it became clear that we both had different interpretations about Multi-Frame CAN messages, and whether there can be multiples of these in flight betwe…
-
We need to document the recommended / required bit timing information for CAN-bus.
generally based on the cable length that we are trying to achieve we have a requirement on the prop segment length.
…
-
When sending a ProtocolSupportReply message over the LCC bus, if the payload is not 8 bytes long it is not parsed correctly([more information](https://groups.io/g/openlcb/topic/96448261)).
In JMRI,…
-
Two minor administrivia things I've noticed and Alex asked me open a ticket to track. Apologies if they've been fixed already.
1) S-9.7.0.3, April 25, 2021 adopted version. "Manufactures" is used…
-
Steps to repro:
- open firmware uploader from JMRI
- hit select file
- press cancel on the dialog
expected result: nothing happens
actual result: NPE gets printed to the console.
This is w…
-
Anytime using JMRI to read a CDI, the console log gets a whole bunch of these messages.
2022-02-13 14:29:49,239 mentations.MemoryConfigurationService INFO - Expected reply pending, got zero.
[AWT…