-
It appears that recentish Java versions enforce stricter access controls for reflection methods than formerly. (Transcript below.)
I don't know if this is the right way to fix it, but it seems that…
-
The fan script did not work properly after installation, so I had a look at the service:
```
pi@raspberrypi:~ $ sudo systemctl status x-c1-fan.service
● x-c1-fan.service - Daemon to monitor and co…
-
-
The current implementation of movement is strictly tied to the controller. With the programming for the IMU and depth detection practically complete, a more rigorous control model must be implemented.…
-
for high-precision heating, something like https://gist.github.com/DzikuVx/f8b146747c029947a996b9a3b070d5e7 could be used to accurately control the CPU temperature :-)
-
[18538.050117] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 3.
[18538.052279] systemd[1]: Stopping Flush Journal to Persistent Storage...
[18538.076483] systemd…
-
### Description
Hi, I'm quite new here. I'm trying to use Marlin on my robot for chemical reactions. Actually the robot has 6 axes for driving syringes plus several servos for valves. I wis…
-
cmd: ros2 launch mycobot_630 slider_control.launch.py ip:=192.16.110.149
[ERROR] [joint_state_publisher_gui-2]: process has died [pid 74701, exit code -2, cmd '/opt/ros/humble/lib/joint_state_pub…
-
Lesson feedback: There was an error in the PID control excercise. z_dot_dot_ff wasn't defined in the testing code. we shouldn't of had to adjust that code to get it to work. The solution code didn't w…
-
Been mucking around with sycning the model to the wheel speed. Goes a
little something like this:
- set starting resistance (10% + gradient) (some what arbitrary)
- wait for wheel speed to reach stead…